Bits 7" or more

DH-110
FLAT RING SNAFFLE BIT
$21.95

4" Flat Ring, rounded on the edges .

Sizes: 6", 6 1/2"

SW-3353
EGGBUTT SNAFFLE BIT
$31.95
Side pieces are ovals 3 1/2" high, 3" wide
A mild bit that will not pinch the corners of their mouths. The design ensures that the bit will remain fixed and allows no up and down movement. The Stainless Steel oval shaped rings will not normally pull through the mouth. For a well behaved horse.
Sizes: 5 1/2"5 3/4", 6", 7"

AHE-107
UXETER KIMBERWICK LOW PORT
$71.99

MADE IN THE USA!

This stainless steel bit comes with a curb chain and hooks.

Sizes

SD-130
HANGING CHEEK SNAFFLE BIT (FILET BAUCHER)
$32.95
This stainless steel Hanging Cheek Snaffle applies slight poll pressure in addition to the pressure on the lips, tongue and bars. This encourages a lower head carriage. A kind bit that is stronger than an ordinary, single jointed snaffle, but not as strong as a Kimberwick.
4" Cheek piece with 2 3/4" larger ring,and 1" smaller ring
Mouth is 13mm at side joint narrowing to 11mm then back to 13mm at the thickest spot

Sizes: 5 1/2"

SD-133
JOINTED KIMBERWICK BIT
$39.95
Stainless Steel, comes with Curb Chain and hooks. The jointed snaffle makes this is good bit to use on your hard to stop Draft. Also offers good lateral control of horse. The cheekpiece is 5" high x 3" across. Sizes: 5 1/2"

DH-109
BUTTERFLY COPPER FRENCH LINK SNAFFLE BIT
$39.95
Sizes: 5 1/2", 6 1/2"

DH-113
TOM THUMB SNAFFLE BIT
$27.95
8 1/2" side pieces

Stainless Steel Mouth Sizes:
5 1/2, and 6 1/2"

SD-160
LOOSE RING BRADOON
$19.95
I had these made to compliment the dressage Weymouth.
They have a 14mm mouth where it joins the ring, narrower at the center
3" Ring Sizes: 5 1/2" 6",

DH-102NP
JOINTED TEAM BIT - NICKEL PLATED
$15.95
The simple snaffle bit applies pressure to the horse tongue in a pinching manner to aid in controlling the horse. Available in Nickle Plated over Malleable Iron with 3 Inch Rings
Sizes: 5 1/2", 6", & 7"

SW-3997
Loose Ring with oval link and Cuprium Mouth
$36.95
This bits is made of the world's finest 18-8 (chromium/nickel) stainless steel. An alloy that is best for bits because it extremely strong. It also resists salt and acids in saliva, and will never rust or spot. Loose Ring Snaffle with oval link and Cuprium Mouth
Sizes: 5", 5 1/4", 5 1/2", 6"

SW-3824

Quarter Moon Kimberwick bit,
$52.95

Made of the world's finest 18-8 (chromium/nickel) stainless steel. This alloy is best for bits because it extremely strong and resists salt and acids in saliva, and will never rust or spot. Our bits are investment (lost wax) cast from carefully crafted models of tested bit designs to insure consistently perfect quality bit after bit. Even with these advanced production methods, every bit is hand inspected. Mouth thickness: 12 mm*
Size: 5 1/2", 5 3/4", 6", 6 1/2", 7"

SW-3961
Short Cheek Jointed Pelham
$52.95
Made of the world's finest 18-8 (chromium/nickel) stainless steel. This alloy is best for bits because it extremely strong and resists salt and acids in saliva, and will never rust or spot.
Size: 5 1/2", 6", 6 1/2", 7"

SW-7355
D-Ring Jolly Mouth Snaffle
$36.95

The synthetic mouth of this bit is gentle to horse teeth and tongue. Since it doesn't conduct cold like metal does, it's the ideal bit for winter riding. No need to preheat bit before placing in horse's mouth.

Size: 5 1/2", 6", 6 1/2", 7"

SW-7397
Jolly Mouth Loose Ring Snaffle
$32.95

Made of the world's finest 18-8 (chromium/nickel) stainless steel. This alloy is best for bits because it extremely strong and resists salt and acids in saliva, and will never rust or spot. Surgical quality finish. Our bits are investment (lost wax) cast from carefully crafted models of tested bit designs to insure consistently perfect quality bit after bit. Even with these advanced production methods, every bit is hand inspected.
Size: 5 1/2", 6"

SW-7753
Hunter Dee Cuprium Oval Link Snaffle Bit
$42.95
This bit has a curved mouth.
Sizes: 5 1/2", 6", 6 1/2"

DH-113
TOM THUMB COPPER MOUTH SNAFFLE BIT
$32.95

8 1/2" stainless steel side pieces

Copper Mouth Sizes: 5 1/2",

KNS-087 LOOSE RING JOINTED MOUTH(22mm)
$28.95

Loose Ring bit with a jointed mouth
Mouthpiece is 22mm, and Solid
Sizes: 6", 6 1/2", 7"

SW-3999 Hanging Cheek Snaffle with Cuprium Link
$43.95

Hanging Cheek bit with Cuprium link
sizes: 5 1/2, 5 3/4", 6", 6 1/2" and 7"

SW-7758
Hunter Dee-Ring Snaffle
$42.95

The surgical quality bits are made of the world's finest 18-8 (chromium/nickel) stainless steel. This alloy is best for bits because it extremely strong and resists salt and acids in saliva, and will never rust or spot.

Sizes: 5 1/2", 6", 6 1/2" and 7"

KS-D-RIng Jointed Snaffle
$34.95

D-Ring Jointed Snaffle Bit
Size: 7"

Size:

AHE-162
EGGBUTT SWEET IRON SLOW TWIST
$57.95

MADE IN THE USA!

The stainless steel eggbutt side pieces are 2 1/2" high, 1 1/2". The mouth is made from sweet iron with a twisted mouth that offers more attention getting power that the standard snaffle mouth.
Sizes: 7"

Size

AHE-114

GRAZING BITwith STAINLESS STEEL MEDIUM PORT
$56.99

MADE IN THE USA!

This stainless steel Grazing bit allows the horse to swallow, also graze hence the name. Great leverage for stopping, this bit is super for the well behaved & schooled horse. Designed to be used with a horse that neck reins. Direct reining is not used with this bit as it does not allow for lateral control. It has 6 1/2" sides with 1" rings.
Stainless Mouth

Sizes: 6", 6 1/2", 7"

Sizes:

DraftTack Home Page

Bits 7" or more